Standard for Temper
| code | Chinese Stardard | Japaness Standard | American Standard | European Standard | International Standard |
| GB/T 2520-2000 | JIS G3303-2002 | ASTM A623M-2002 | DIN EN 10203-1991 | ISO 11949-1995 | |
| T-2 | TH52+SE | T-2 | T-2(53) | T52 | TH52+SE |
| T-2.5 | TH55+SE | T-2.5 | TH55+SE | ||
| T-3 | TH57+SE | T-3 | T-3(T57) | T57 | TH57+SE |
| T-3.5 | |||||
| T-4 | TH61+SE | T-4 | T-4(T61) | T61 | TH61+SE |
| T-5 | TH65+SE | T-5 | T-5(T65) | T65 | TH65+SE |
| DR-7M | DR-7.5 | ||||
| DR-8 | TH550+SE | DR-8 | DR-8 | DR550 | TH550+SE |
| Temper | HR30T | Applications |
| T1 | 49±3 | Nozzles, spouts, closures, and deep drawing. |
| T2 | 52±3 | Rings and plugs, pie pans, closures, shallow drawn and specialized can parts. |
| T2.5 | 55±3 | Battery can bodies, small can ends and bodies. |
| T3 | 57±3 | Can ends and bodies, large diameter closures, crown caps. |
| T4 | 61±3 | Can ends and bodies, crown caps and small screw closures. |
| T5 | 65±3 | Can ends and bodies for non corrosive products. |
| DR-8 | 73 ± 3 | small diameter round can bodies and ends |
Coating weight
| Classification | Designation of tin coating weight | Nominal tin coating weight(g/m2) | Min average tin coating weight(g/m2) |
| Equal tin coating(E) | 1.1/1.1 | 1.1/1.1 | 1.8 |
| 2.2/2.2 | 2.2/2.2 | 4.0 | |
| 2.8/2.8 | 2.8/2.8 | 5.0 | |
| 5.6/5.6 | 5.6/5.6 | 10.5 | |
| Differential tin coating(D or A) | 2.2/1.1 | 2.2/1.1 | 2.0/0.9 |
| 2.8/1.1 | 2.8/1.1 | 2.25/0.9 | |
| 5.6/1.1 | 5.6/1.1 | 5.05/0.9 | |
| 2.8/2.2 | 2.8/2.2 | 2.25/2.0 | |
| 5.6/2.2 | 5.6/2.2 | 5.05/2.0 | |
| 5.6/2.8 | 5.6/2.8 | 5.05/2.25 |